PLC HMI SCADA Level 1

Are you ready to step into the world of industrial automation with a strong foundation in PLC, HMI, and SCADA systems? Our PLC HMI SCADA Level 1 Course is designed for beginners and professionals alike, providing a comprehensive introduction to the essential tools and concepts in industrial automation. From PLC programming and troubleshooting to integrating HMI and SCADA for a seamless control environment, this course covers it all.

Course Outline:

    • Introduction and History
    • Introduction to TIA portal and its installation
    • Programming languages ladder,
    • Making Simple Program in TIA
    • Add remora over PLC controllers IN TIA program
    • Going online with s7-1200 plc via TIA
    • Connecting s7-1200 via Ethernet
    • Topology, networked device views
    • Upload /download program in PLCs
    • Working with different types simulators like PLCSIM and semi simulating

Modules.

    • Integration of simulator with TIA and their offline control
    • Monitoring of plc program while online
    • Checking and setting the CPU /CONTROLLER and module properties
    • Create tags for the I/O of the CPU.
    • Create a simple network in your user program
    • Use the PLC tags in the tag table for addressing the instructions
    • Inserting new networks and deleting them
    • Program blocks and main OB
    • Bit Logic Instructions NO, NC, COIL
    • Word Logic Operations, AND, OR NOT, NAND, XOR, XNOR
    • Assignments and negative assignments
    • Set/reset coil with flip-flops
    • Timers TP, TON,, TOFF and time accumulators
    • Counters UP, DOWN, UP/DOWN
    • Range and validity functions
    • Comparator Like equal to, not equal to, less than, greater than etc.(= ,> ,< ,>= ,<= )
    • Arithmetic Functions like add Sub,MUL, DIV,MOD,NEG ,INC,DEC,ABS ,MIN,MAX
    • ,LIMIT
    • MOVE Block FIELD READ, FIELD WRITE etc.
    • Advance Functions like SWAP, CONVERT, CEIL, FLOOR
    • Special Functions
    • Plc tags and adding a new tag table
    • Plc data types, into, float, double, byte etch and how to add them
    • Plc troubleshooting and maintenance
    • Watch and force table and how to add them in the project
    • Introduction to analog and digital sensors
    • PT100, opt electrical, limit switches
    • Integration of sensors with plc and taking values in TIA
    • Calibrating analog sensors RTD and Thermocouple
    • Reading analog sensor values from TIA portal
    • Going online problems and their solutions
    • WinCC Runtime Advanced
    • Implement PLC Programming in Factory Environment
    • Intro to VFD and frequency drives
    • VFD parameter setting in FUJI
    • Connect VFD with PLC and control by the current change
    • HMI (Human Machine Interface) Section
    • Learn to Program WIENTEK HMI
    • Learn to design in a Utility manager
    • Creating tags in HMI in the utility manager
    • Adding buttons , lamps , numeric inputs, and outputs
    • Connect HMI with plc
    • Download the program in HMI as well as online and offline simulations
    • HMI and plc connection problems and solutions
    • Reading senor value at HMI
    • Controlling motors from HMI
    • WinCE Runtime Advanced
    • Programming with Factory I/O
    • Introduction to SCADA
Scroll to Top